Publicité
Les langues disponibles
Les langues disponibles
Operating the oven
Using the options function
This function enables you to control various electronic control options.
Refer to the following table for available options.
The option menu is only available when the oven is not being used (not cooking).
Options
1. Temp Adjust
Lets you correct the temperature in the oven.
2. Temp Unit
Lets you program the oven control to display
temperatures in Fahrenheit or Celsius.
The convection auto conversion feature automatically
3. Auto Conversion
converts entered regular baking temperatures to
convection baking temperatures.
4. Time of Day
Lets you set the clock to display the time of day in the
(12hr/24hr)
12-hour or 24-hour mode.
5. 12-hour energy
This feature automatically turns off the oven after
saving
12-hours during baking functions or after 3 hours during
a broil function.
6. Sound On/Off
Lets you set the oven controls to operate silently.
7. Wi-Fi On/Off
Lets you set the wi-fi network to deactivate.
This option is for use by retail establishments for display
0. Demo mode
purposes only.
NOTE
Options key location.
44 English
NE63B8611-03_IB(FULL)_EN+MES+CFR.indb 44
NE63B8611-03_IB(FULL)_EN+MES+CFR.indb 44
Feature
Temp Adjust
The temperature in the oven has been calibrated at the factory. When first using
the oven, be sure to follow recipe times and temperatures. If you think the oven is
too hot or too cool, you can correct the temperature in the oven. Before correcting,
test a recipe by using a temperature setting that is higher or lower than the
recommended temperature. The baking results should help you to decide how
much of an adjustment is needed.
The oven temperature can be adjusted ±35 °F (±19 °C ).
How to correct the oven temperature
1.
Press
Options for 3 seconds, and then Press 1 on the number pad.
2.
Press Clock
to select higher or lower than the current temperature.
3.
Enter the adjustment you want to make using the number pad. (0-35).
4.
Press START/SET to save the changes.
NOTE
This adjustment will not affect the broiling or the self-cleaning temperatures.
The adjustment will be retained in memory after a power failure.
Temp Unit (Fahrenheit or Celsius temperature selection)
You can program the oven control to display the temperature in Fahrenheit or
Celsius. The oven has been preset at the factory to display in Fahrenheit.
How to change the display from Fahrenheit to Celsius or Celsius to Fahrenheit
1.
Press
Options for 3 seconds, and then Press 2 on the number pad.
Press 1 (Fahrenheit) or 2 (Celsius) on the number pad.
2.
3.
Press START/SET to save the changes.
2023-10-13 오후 2:14:17
2023-10-13 오후 2:14:17
Publicité
