Caroma 326201W Instructions D'installation

INSTALLATION INSTRUCTIONS:
Soft Close Top-fixing Toilet Seat
Model 326201W - Round /326202W - Elongated
Thank you for choosing a Caroma seat. This seat represents the finest in workmanship and design, featuring both slow close and
easy clean functions. Please read through the manual carefully to ensure optimum performance and longevity of your product.
Please read through all instructions before beginning installation and have a screw driver ready in advance.
1) From above, insert and push
expandable plastic anchors into seat
fixing holes in bowl until they are flush
with the surface.
4) Adjust the seat so that it aligns with
the bowl.
Important Note: Never force the seat closed as this will damage your soft close hinges.
Simply close softly and allow the seat to return to a horizontal position.
Cleaning instructions:
Please use only a soft cloth and warm soapy water to clean toilet seats.
Dry seat after washing. Use of abrasives or chemicals can damage the finish.
Under license from Caroma Industries Limited, Australia
Manufactured by SSI Sustainable Solutions International.
Los Angeles, CA + Vancouver, BC
2) Insert rubber washers into the
bottom of seat hinges.
5) Tighten screws with a screw driver.
Customer Service:
www.caromausa.com
www.sustainablesolutions.com
help@sustainablesolutions.com
Toll Free: (800) 460.7019
Two adjustment plates offer
three different hole positions
(front, middle and rear).
3) Fit seat onto the bowl. Choose the
hole in the adjustment plate that best
aligns with the seat fixing holes in the
bowl. Put screws through holes and
thread into expandable anchor without
tightening.
6) Close the hinge covers and your
installation is now complete.
326201W /326202W Instructions /Ver.1.0 2015
Scan this QR Code with your
mobile device to visit our
website for more information.