Publicité
Les langues disponibles
Les langues disponibles
ELECTRICAL PRUNING SHEAR
17. TOOL INDICATIONS AND WARNING SIGNALS
17.1 CHARGE LEVEL INDICATION
To determine your pruner battery charge level your pruner is supplied with a
simple to read LED readout.
When all 1 green light is illuminated then your battery is suitable for operation.
Depending on operating variables such as diameter of cut, density of wood and
frequency of the cuts a typical battery charge will last 2.5 hours.
When the red light is blinking then you should charge the battery
as soon as possible.
17.2 WARNING TONE OF THE BATTERY
Have your power tool serviced by a qualified repair person using only identical
parts for replacement. This will ensure the safety of the power tool.
Beeps
Interval
1 time
seconds
Short
4
times
seconds
2 times
seconds
Note: Pruners that have cut over 100,000 times, require
comprehensive inspection and maintenance.
76
LED
Green
Orange
Red
Frequency
0,3
Not repeating
0,1
Not repeating
0,1
5 repeticiones
Charge level
100% – 40%
40% – 20%
Less than 20%
Indication Description
On and off.
The battery is running out. Please
charge as soon as possible.
After tried to cut 10 times a too big
branch.
www.gruposanz.es
Publicité
