Linea 2000 DOMO DO91122 Mode D'emploi page 52

· Turn the freezer compartment door 180°, put the mounting cap on the upper axle and then fit the axle
into the hole at the top of the appliance.
· Keep the freezer compartment door closed. Put the mounting clamp on the lower axle and put enough
pressure so that there is no gap between the mounting clamp and the housing of the appliance, then
fix the screw of the mounting clamp.
· You can use the supplied cover caps to cover the original screw holes.
USE
CONTROL PANEL
Display
1. Temperature of fridge: 8°C
2. Temperature of fridge: 6°C
3. Temperature of fridge: 4°C
4. Temperature of fridge: 2°C
5. Super-freezing
Touch screen buttons
A. Temperature of fridge / Super-freezing
TEMPERATURE CONTROLS
· The temperature of the fridge can be set between 2 and 8°C. Under normal conditions, it is best to
select 4°C. Press the middle of the "Temp./3sec" button (temperature fridge) and continue to press
until the desired temperature is displayed.
· The operating time and temperature is influenced by the location of the fridge, the number of times
the door is opened and the temperature of the room the fridge is in.
Super-freezing
· Select this function if the standard temperature does not cool sufficiently. For example: with
extremely hot weather, if the doors are opened often, with a high environmental temperature, if a
large quantity of uncooled/unfrozen food is placed in the appliance, etc.
52
DO91122