Publicité
Les langues disponibles
Les langues disponibles
Exhaust ducting guide
Ducting
1. Make sure the dryer is installed properly so the air exhausts freely.
2. Use 4-inch rigid metal ducts. Tape all joints including the dryer connection.
Never use lint-trapping screws.
3. To facilitate the exhaust, keep the ducts as straight as possible.
Cleaning
Clean all old ducts before installing the dryer, and make sure the vent flap opens and
closes freely. We recommend that you to clean the exhaust system annually or on a
regular basis.
WARNING
• To prevent fire, do not use plastic, thin-foil, or non-metal flexible ducts of any kind.
• Do not use a poor exhaust system because it slows down the dryer's performance.
• Do not use excessively long ducts that have multiple elbows.
• Do not use crushed or clogged venting or ducts.
Switching the door position
DV7350N_DC68-03784L-02_EN.indd 29
To reverse the direction of the door, we
recommend that you contact a qualified
technician. It is recommended to put a soft
rug on the floor to prevent scratches on
the door.
1. Put a soft rug on the floor to rest the
door on after you have removed it.
This will prEvent the door from being
scratched.
2. Unplug the power cord of the dryer.
3. Remove the four hinge screws from
the door, and then remove the door by
lifting it up slightly.
English 29
2020-12-15
4:24:28
Publicité
