Publicité
Les langues disponibles
Les langues disponibles
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 15 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.
For the installation, you need one SFc-10 lamp with up to max. 800 W.
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
14/32
00025650.DOC, Version 1.3
Publicité
