Cleaning after use
RISK OF ELECTRIC SHOCK
►
Disconnect the appliance from the power outlet before cleaning it.
―
First, pull the connector plug
―
Then pull the charger
―
Close the charging socket
CAUTION – PROPERTY DAMAGE!
►
Make sure that no water gets into the charging socket
►
Do not use abrasive, chemical or caustic cleaning agents to clean this
appliance.
►
Never submerge the hand element
NOTE
►
Replace the respective brush heads every 3 months or earlier if required.
You will find out how to order replacement parts in the section Ordering
replacement parts.
■
Remove the brush head
■
Clean the brush heads
shampoo with plenty of clean water.
Lay the brush heads
surface and allow them to dry fully.
■
Wipe the hand element
a mild detergent to the cloth. Afterwards, wipe off with a cloth moistened
only with clear water to ensure that no detergent remains on the appli-
ance.
■
Wipe the charger
completely dry before using it again.
Storage
■
Store the cleaned and dried appliance in the supplied storage pouch
■
Store the appliance in a dry and dust-free location.
│ GB │ IE
■
24
out of the mains power socket.
with the charging socket cover
/
from the hand element
/
with a little mild shampoo and rinse off the
/
with the bristles facing upwards on a level
with a damp cloth. For stubborn soiling, add
with a damp cloth. Ensure that the charger
out of the charging socket
under water!
.
.
.
after each use.
is
.
SRK 3.7 A1