1
20
1
Basic Operation
Raising the Monitor
Note: The CVA-1005 is a device of precision.
Please gently handle it to enjoy its
excellent capabilities for a long time.
Press the OPEN/CLOSE button.
The unit beeps 3 times and raises the monitor
automatically.
Notes: • If the monitor touches an obstacle
while it is being raised, the unit will
stop raising the monitor immediately.
Should this occur, remove the
obstacle and press the OPEN/
CLOSE button again to raise the
monitor.
• When the movable monitor is
opened, do not place any object on
the monitor and be careful not to
bump or apply any pressure to the
monitor while it is open. This can
cause damage to the mechanism.
• Under low ambient temperature
conditions, the display may be dark
for a short period of time immediately
after the power is turned on. Once
the LCD has warmed up, the display
will return to normal.
• For your safety, some operation of
the unit cannot be performed while
the vehicle is in motion. In this case,
first stop the vehicle and engage the
parking brake, then perform the
operation.
• Operation of the remote control
(described on pages 216-224) can be
carried out even while the monitor
screen is closed.
English