Garmin TREAD Manuel D'utilisation page 67

Speaker and LED Wiring Harness Wire and Connector Identification
Wire Group Wire Color and Description
Red: Connects to the vehicle accessory line. If the ignition wire is unused, ground the
Ignition
ignition wire or leave it disconnected.
Blue: Connects to an optional external amplifier to turn it on when the stereo turns on.
Amplifier on
White: Left (+), Connects to the included speaker.
White with a black stripe: Left (-), Connects to the included speaker.
Speaker zone 1
Gray: Right (+), Connects to the included speaker.
Gray with a black stripe: Right (-), Connects to the included speaker.
Green: Left (+), Connects to an additional speaker.
Green with a black stripe: Left (-), Connects to an additional speaker.
Speaker zone 2
Purple: Right (+), Connects to an additional speaker.
Purple with a black stripe: Right (-), Connects to an additional speaker.
Black: Power
Red: Red LED
LED RGB1
Green: Green LED
Blue: Blue LED
Black: Power
Red: Red LED
LED RGB2
Green: Green LED
Blue: Blue LED
Annexes 59