Publicité
Les langues disponibles
Les langues disponibles
Refit the hood glass and fasten the glass screws. Make sure the screws
are fully tightened.
TROBULESHOOTING
Fault
Light on, but
fan does not
work
Both light and
fan do not
work
Serious
Vibration of
the unit
Suction
performance
not good
Technology
Standard
Frequency Band(s)[MHz]
Maximum Power[mW]
Product information for networked equipment
power consumption of the product in
networked standby if all wired
network ports are connected and all
wireless network ports are activated:
How to activate wireless network port:
How to deactivate wireless network port:
Cause
The fan blade is
jammed.
The motor is damaged.
Halogen light bulb burn.
Power cord looses.
The fan blade is
damaged.
The fan motor is not
fixed tightly.
The unit is not hung
properly on the bracket.
Too long distance
between the unit and
the cooking plane
Solution
Switch off the unit and repair by
qualified service personnel only.
Replace the bulb with correct
rating.
Plug in to the power supply again.
Switch of the unit and repair by
qualified service personnel only.
Switch off the unit and repair by
qualified service personnel only.
Take down the unit and check
whether the bracket is in proper
location.
Readjust the distance to 65-75cm
Wi-Fi
802.11 b/g/n
2400 MHz - 2483.5 MHz
100 mW
2 W
If the Hood has been enrolled with the APP,
turn on the Hood to activate wireless
network port.
If the Hood has been enrolled with the APP, turn
off the Hood to deactivate wireless network port.
If the Hood hasn't been enrolled with the APP,
wireless network port will be deactivated even the
Hood is on.
21
Publicité
