Atag KD8178BF Instructions D'utilisation Et De Montage page 36

Putting into operation
Fig. 5
36
4.4.1 Installing the appliance
Fig. 6
u Detach the connecting cable from the rear of the appli-
ance. Remove the cable holder otherwise there will be
vibratory noise.
u Lay the connecting cable with
the help of string in such a way
that the appliance can be
easily connected following
installation.
All appliances:
u Slide the appliance 3/4 of the way into the recess.
Fig. 6 (5,6,7) .
u Remove the covers
Fig. 7