Publicité
Les langues disponibles
Les langues disponibles
E
N
Model assembly
Landing gear assembly
1.With the fuselage inverted and hook inserted as shown, install the landing gear assembly onto the fuselage using the included
screws and plastic retainers.
2.Attach the springs to the landing gear assembly as shown.
Wing installation
1. Insert the wing spar into the pass-through on the fuselage.
Insert both wing halves onto the wing spar.
Note: Ensure that the wing halves and plugs are properly seated
onto the fuselage.
2. Use the wing bolts to secure the wing halves as shown.
HKM3.0*10
4
HKM3.0*16
Publicité
