Johnson JWASH Serie Guide D'utilisation page 89

Filling The Rinse Aid Reservoir
Remove the rinse aid
1
reservoir cap by rotating it
counterclockwise.
Close the rinse aid reservoir
3
cap by rotating it clockwise.
Adjusting the rinse aid reservoir
Turn the rinse aid indicator dial to a number. The
higher the number, the more rinse aid the
dishwasher uses.
If the dishes are not drying properly or are spotted,
adjust the dial to the next higher number until your
dishes are spot-free. Reduce it if there are sticky
whitish stains on your dishes or a bluish film on
glassware or knife blades.
Carefully pour in the rinse-
2
aid into its dispenser, whilst
avoiding it to overflow.
NOTE:
Clean up any spilled rinse aid
with an absorbent cloth to
avoid excessive foaming
during the next wash.
41
V.1