Miele SD Serie Mode D'emploi page 32

en - Warning and Safety instructions
Technical safety

Before using the vacuum cleaner and its accessories,
check for any visible signs of damage. Do not use a dam-
aged appliance.

Compare the connection data on the data plate of the
vacuum cleaner (mains voltage and frequency) with that of
the mains electricity supply. This data must match exactly.
Without modifications, the vacuum cleaner is suitable for
50 Hz or 60 Hz.

The mains electrical plug must be fitted with an appro-
priate fuse.

AU/NZ: The mains electrical outlet must be fitted with an
appropriate circuit breaker.

Temporary or permanent operation on an autonomous
power supply system or a power supply system that is not
synchronised with the mains power supply (e.g. island net-
works, back-up systems) is possible. A prerequisite for op-
eration is that the power supply system complies with the
specifications of EN 50160 or an equivalent standard.
The function and operation of the protective measures
provided in the domestic electrical installation and in this
Miele product must also be maintained in isolated opera-
tion or in operation that is not synchronised with the mains
power supply, or these measures must be replaced by
equivalent measures in the installation. As described, for
example, in the current version of BS OHSAS 18001–2 ISO
45001.
32