Télécharger Imprimer la page

Bosch CR24 Mode D'emploi Et De Montage page 48

Masquer les pouces Voir aussi pour CR24:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 63
48 | en
replaced by newly found
stations.
If priority for traffic information
f
is active, only stations that carry
traffic information will be saved.
If PTY is activated, the next
f
station of the selected program
type is selected.
f Select the desired waveband.
f Press and hold down the BND 2 button
for longer than two seconds.
The storing procedure begins. The display
shows
"T-STORE". After the process has completed,
the radio will play the station that is stored in
memory location one of the FMT, AMT, MWT,
LWT or SWT memory banks.
Listening to stored stations
f Select the memory bank or waveband.
f Press the station button 1 – 6 < where
the desired station is stored.
Scanning through the preset sta-
tions (PRSTSCAN)
This function allows you to hear all the stored
stations for about 10 seconds each.
Note:
This function is only available if the
"PRSTSCAN" setting for the
8 buttons has been selected in the
menu (see the section on "Setting
button functions" in this chapter).
7 620 210 016 | 11.2013
Starting the scan
f Press the
"PRSTSCAN" briefly appears on the display.
Each station saved in the current memory bank
is played for about 10 seconds. At the same
time, the display shows the current frequency
or the station name.
Stopping scan
f Press the
The scan process is stopped. The device
remains tuned to the previously played station.
Scanning receivable stations
(BANDSCAN)
This function allows you to scan all receivable
stations each for about 10 seconds.
Note:
This function is only available if the
"BANDSCAN" setting for the
8 buttons has been selected in the
menu (see the section on "Setting
button functions" in this chapter).
Starting the scan
f Press the
"BANDSCAN" briefly appears on the display.
The device searches for stations in the current
waveband. Every station found is played for
about 10 seconds. At the same time, the
or
display shows the current frequency or the
station name.
Stopping scan
f Press the
Robert Bosch Car Multimedia GmbH
Radio operation
or
8 button.
or
8 button.
or
8 button.
or
8 button.
or

Publicité

loading