Kiva D3 87ESM Notice D'utilisation page 25

Accessories :
For your safety's sake,it is formally prohibited to fit any other accessory than those
specifically designed for your model and type of bruch cutter. ( Listed below )
- Wheels unbreakable KZ04040005- KZ04040006
ADVICE ON USING, MAINTAINING AND ADJUSTING YOUR MOTOR
MOWER.
1 - Maximum thickness of cut: 15mm.
2 - Maximum engine speed 2,800 r.p.m.
3 - On slopes, you are advised not to let the machine freewheel backwards or forwards, or to
let the clutch out suddenly. This causes a violent shock on the polyamide wheel inside the
mechanism which is not covered by the guarantee.
4 - If the drive belt jumps:
- Check that the roller is perpendicular and resting on the back of the belt.
- Check that tension of the belt is correct
5 - If the traveller breaks:
- Engine speed too great.
- Inadequate play between the blade and the blade holder
- The movement of the blade needs readjusting
6 - When changing the polyamide wheel inside the drive mechanism, ensure it rotates freely
on its axis for one turn without straining. If it does not, use a screwdriver to push back the
back the bearings from the wheel shaft to relieve the stress between the two cog-wheels.
5 EN