Miele PTD 701 Traduction De La Notice D'utilisation Originale page 45

3 Machine description
3.1 Description of function
After the warewasher is switched on, the boiler and the tank are filled and heated up to the operating temperature. Once the target tem-
peratures are reached, the warewasher is ready for use.
The warewasher is fully automatic with programmes consisting of three steps: Wash, Drain and Rinse.
3.2 Overview
Item Description
1 Display
2 Start button
3 Door
4 Integral storage tanks for rinse aid and detergent (op-
tional)
5 Strainer
6 Filter cylinder
7 Lower wash field
8 Integral water softener
(optional)
Integral water softener (optional)
Warewasher with built-in salt container for regeneration salt. The regeneration salt softens the inlet water and thus prevents a build-up
of limescale inside the warewasher and on the items being washed.
PTD 701 AE RO (DOS) / PTD 702 AE RO (DOS) (device variant)
Note: Cold water connection required.
A reverse osmosis device is fitted in AE RO (DOS) warewashers. Reverse osmosis removes substances that have dissolved in the wa-
ter. The largely limescale and mineral-free osmosis water prevents deposits on glasses, dishes and cutlery and delivers wash results
that do not require polishing. DOS warewashers also have an integrated cleaning container.
Operating instructions
1
5 6 7
3
4
10 11
2
8
12 13
Item Description
9 Filter bottom
10 Connection for supply hose
11 Mains cable
12 Connection for on-site equipotential bonding system
13 Connection for waste water hose
14 Suction tube for rinse aid (optional)
15 Suction tube for detergent (optional)
| |
12623590; 2024-01
| |
Machine description 3 English
9
14 15
45