Philips sonicare 3000 Serie Mode D'emploi page 15

Brush head replacement reminder
Pressure sensor
- Triple tone of low-med-high means the EasyStart
feature has been activated. The battery level indicator
light will also blink green 2 times to confirm
activation.
- Triple tone of high-med-low means the EasyStart
feature has been deactivated. The battery level
indicator light will blink amber 1 time to confirm
deactivation.
Note: To achieve clinical efficacy, EasyStart needs to be
deactivated.
Note: You can only activate or deactivate the brush head
replacement reminder when a smart brush head is on the
handle.
Note: New smart brush heads come with the brush head
replacement reminder feature activated.
1 Put the handle on the plugged-in charger.
2 Press and hold the power on/off button while the
handle remains on the charger.
3 Keep the power on/off button pressed until you hear
a series of two short beeps (after 5 seconds).
4 Release the power on/off button.
- Triple tone of low-med-high means the brush head
replacement reminder feature has been activated.
The battery level indicator light will also blink green 2
times to confirm activation.
- Triple tone of high-med-low means the brush head
replacement reminder feature has been deactivated.
The battery level indicator light will blink amber 1
time to confirm deactivation.
1 Put the handle on the plugged-in charger.
2 Press and hold the power on/off button while the
handle remains on the charger.
3 Keep the power on/off button pressed until you hear
a series of three short beeps (after 7 seconds).
4 Release the power on/off button.
15
English