Garland NIPON 620 QH Manuel D'instructions page 32

English
3. WARNING SYMBOLS
Warning labels indicate required information for the
use of the machine.
Warning and care.
15 m (50 ft)
Use protective non skid boots with
protective steel.
Use appropriate security gloves.
It is necessary to use eye and acoustic
protection at any time.
It is necessary to read this manual
carefully before using this machine.
Attention!: Do not touch the cutting blade.
Attention!, Danger!: The cutting tool can
project hard objects.
Caution! Maximun speed of gear
XXXX min
Caution! Hot Surface.
Do not smoke or bring a flame to the
combustible or the machine.
Do not let people enter in
the work area. This area
will be of a diameter of
15 meters from the point
in which you are working.
-1
.
Sense of rotation.
-1
XXXX min . XXXX min
Attention!: The fuel used is highly
inflammable.
Attention!:Do not refill the machine in a
closed area.
4. MACHINE SYMBOLS
In order to ensure safe operation and maintenance of
the machine are the following symbols in the machine.
START
Air clutch.
Fuel tank.
Oil Tank
Air positions:
Open = Normal operating position.
Located in the top of the filter.
Position for starting the machine in cold.
Located on the of air filter cover.
0
Positions start switch located on the right
STOP -
handle of the machine.
"O" = Off (The machine don´t work)
I
"I"= On (The machine is ready to work)
START
Accelerator fixing position.
32/144
Maximum tool rotation
speed.
-1
.