b) Connecting a USB load
• Connect the switched-off USB device to the power supply unit's USB port.
• Connect the power cord's low-voltage plug with the matching socket of the power supply unit.
• Connect the mains plug to a standard mains socket. The LED on the top of the power supply
unit indicates operational readiness.
• Put the power supply unit onto a solid, flame-retardant surface and ensure that the power
supply unit is sufficiently ventilated.
• Now switch the connected USB device on. If it does not function properly, switch it off
immediately and disconnect it from the power supply unit.
• Remove the power supply unit from the mains when it is no longer in use.
Care and cleaning
• Disconnect the power adapter from the mains voltage and from the connected device before
cleaning.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could
damage the casing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be disposed of in household
waste. Always dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Operating voltage ......................... 100 – 240 V/AC, 50/60 Hz 1.6 A
Output voltage/-current ................. 5 V/DC, 2000 mA (USB)
12 V/DC, 6000 mA ±10 %
14 / 15 / 16 V/DC, 5000 mA ±10 %
18 / 18.5 / 19 V/DC, 4200 mA ±10 %
19.5 / 20 V/DC, 4000 mA ±10 %
21 / 22 V/DC, 3700 mA ±10 %
Output power ................................ max. 90 W
Input cable length ......................... 1.2 m
Output cable length ...................... 1.5 m
Operating temperature ................. 0 bis +35 ºC
Operating humidity ....................... 10 – 85 % RH
Storage temperature ..................... -10 bis +55 ºC
Storage humidity ........................... 5 – 95 % RH
Dimensions (W x H x D) ............... 154 x 38 x 59 mm
Weight .......................................... approx. 496 g (without power cable and plug)
Low-voltage plugs
Plug
Imprint
Plug Ø inner/outer
AG
0.6 (pin) x 4.5 mm
Inner: 3.3 x 6.6 mm
AH
Outer: 4.6 x 11 mm
P
T
E
1.4 (pin) x 6.5 mm
G
1.0 (pin) x 5.0 mm
X
N
0.9 (pin) x 7.9 mm
Q V2
0.6 (pin) x 7.4 mm
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE.
Suitable for
HP
Lenovo
Fujitsu, Acer, Asus, Compaq,
Gateway, HP, IBM, Panasonic,
2.5 x 5.5 mm
Samsung, Sharp, Toshiba,
Hitachi
1.7 x 4.75 mm
HP Pavilion series
Fujitsu, Panasonic, Sony,
Samsung, Dell
Samsung
1.7 x 5.5 mm
Acer
IBM, Lenovo
HP
*1544028_v1_0517_02_hk_m_en