Sharp PN-V600 Manuel D'installation page 6

• This product is for use indoors.
• A mounting bracket compliant with VESA specifications is
required.
• Since the monitor is heavy, consult your dealer before
installing, removing or moving the monitor.
• Mounting the monitor on the wall requires special expertise
and the work must be performed by an authorized SHARP
dealer. You should never attempt to perform any of this
work yourself. Our company will bear no responsibility
for accidents or injuries caused by improper mounting or
mishandling.
• Use the monitor perpendicular to a level surface. If
necessary, the monitor may be tilted up to 20 degrees
upward or downward.
• When mounting the monitor horizontally, the optional fan
cover (PN-ZR31) is required. For details along with the
horizontal mounting conditions, consult your dealer.
• This monitor should be used at an ambient temperature
between 32°F (0°C) and 104°F (40°C).
• Be careful of high temperatures in the surrounding area.
When installing the monitor inside a housing, or if the
ambient temperature may be outside of the range of 32ºF
(0ºC) to 104ºF (40ºC), install a fan or take other measures
to keep the ambient temperature within the required range.
• Temperature condition may change when using the monitor
together with the optional equipments recommended by
SHARP. In such cases, please check the temperature
condition specified by the optional equipments.
• Do not block any ventilation openings. If the temperature
inside the monitor rises, this could lead to a malfunction.
• Do not place the monitor on a device which generates heat.
• Adhere to the following when installing the monitor in its
portrait orientation. Failing to adhere to the following may
cause malfunctions.
- T o install in landscape orientation, rotate the monitor 90
degrees to the right.
- Set the MONITOR on the SETUP menu to PORTRAIT.
(See Operation manual.)
If any component should be missing, please contact your dealer.
 Liquid Crystal Display Monitor: 1
 Cable clamp: 2
 Power cord: 1
 CD-ROM (Utility Disk for Windows): 1
 Setup manual (this manual): 1
* Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
4
E
MOUNTING PRECAUTIONS
Supplied Components
- B e sure to secure the power cord (supplied) to the cable
clamp attachment with the supplied cable clamp.
Make sure that the power cord (supplied) does not supply
power to the terminal when being secured and do not
over bend the power cord (supplied).
• After installing the monitor, affix the protection covers
(4 pieces) as necessary.
Protection cover
Protection cover
 Protection cover: 4
 Handle screw (short): 4
 Bezel sheet (long/short): 2 each
 Bezel sheet attachment instructions: 1
Power cord (Supplied)
Cable clamp
Cable clamp
attachment