Télécharger Imprimer la page

Bestron AKL323 Mode D'emploi page 17

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
user's instructions
Never use the citrus press for longer than 5 minute without pausing. Switch off the citrus press and
wait a few minutes before continuing.
Stop occasionally to clean the appliance when squeezing larger amounts of fruit. Remove the pulp
from the pulp dish if the openings become blocked. Do not leave any pulp residues behind after
use; dried pulp will be difficult to remove. See also 'Cleaning and maintenance'.
Whilst squeezing, please take into consideration the maximum capacity of the juice container
(maximum 1 litre).
Do not exert too much pressure on the juice cone. If the sound of the motor increases significantly
or themotor itself slows down dramatically,this means too much pressure has been exerted.
cleAninG And MAintenAnce
Clean the citrus press after use.
1. Remove the plug from the wall socket.
2. Remove the pulp dish from the juice container.
3. Remove the pressing cone from the pulp dish (see 'Fitting/removing the pressing cone').
4. Remove the juice container from the motor unit.
5. Clean the pressing cones, the pulp dish, the juice container and the lid with water and washing-up
liquid. After washing, rinse all the parts with ample water and dry them thoroughly.
6. Clean the motor unit with a damp cloth, if necessary moistened with a couple of drops of washing-up
liquid. After cleaning, dry the unit thoroughly.
Verify that the appliance is not connected to the power supply before you clean it.
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
The appliance and the loose parts may not be cleaned in a dishwasher.
Never immerse the appliance's motor unit, the plug or the power cord in water or another liquid.
Do not leave the removable parts to soak in soapy water for too long.
cleAninG And MAintenAnce - storage after use
1. Roll up the power cord into the slot around the motor unit. Place the plug in the storage space in the
appliance's base.
2. Place the pressing cone in the pulp dish (see 'Fitting/removing the pressing cone').
3. Place the juice container, followed by the pulp dish with the pressing cone and finally the lid (1) on the
motor unit.
4. Store the appliance.
GuArAntee terMs
The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried
out during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty
appliance (in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
4. Claims under warranty must be submitted to the dealer where the appliance was purchased or to the
importer.
5. The warranty is issued solely to the first purchaser and cannot be transferred.
6. The warranty does not cover damage caused by:
a. Accidents, incorrect use, wear and/or neglect.
b. Faulty installation and/or use in a manner contravening the prevailing legal, technical or safety
regulations.
c. Connection to a mains voltage other than the voltage specified on the type plate.
d. Unauthorized modifications.
e. Repairs carried out by third parties.
f.
Careless transport, i.e. without suitable packaging materials or protection.
7. No claims may be made under this warranty for:
a. Losses incurred during transport.
b. The removal or changing of the appliance's serial number.
8. The guarantee does not cover power cords, lamps or glass parts.
17

Publicité

loading