Technical Specifications; Service - Salvis Master Mode D'emploi

Fault
The appliance is
switched on but
does not heat up.
The appliance is
not heating up al­
though the indic­
ator light or the il­
luminated ring is
lit.
If you cannot remedy the fault,
− turn off the appliance and disconnect from the mains;
− do not open housing but
− contact Customer Service.
7.

Technical specifications

Technical specifications
Item Nos.
Total connected load
Voltage
Fuse
Overall thermal output
Steam output
Appliance noise level
Basin/pan size
Water supply connection
Water drain diameter
We reserve the right to make technical changes
8.

Service

D Have the appliance inspected and serviced on a regular basis. Maintenance tasks include:
Safety, function and leak testing.
D Installation, service and repair tasks may only be carried out by professional electricians.
D Use only original accessories and spare parts!
D We recommend negotiating a service contract with Customer Service.
Possible cause
An energy optimization unit be­
fore the appliance is not switch­
ing on the heating.
Safety temperature limiter has
tripped.
Pasta cooker GN 1/1
VP607451, VP607471, MA607451, 975095
7 kW
400 V 3N 50/60 Hz
3 x 16 A
2.46 kW
2.06 kg / h
less than 70 dB (A)
308 x 509 x 240 mm / approximately 35 litres
3/4" thread
40 mm
Remedy
Check the energy optimization unit.
Have the appliance checked by the cus­
tomer service agent or a qualified electri­
cian.
en
35 / 84