Emptying The Pan; Raising The Heating Element - Salvis Master Mode D'emploi

Masquer les pouces Voir aussi pour Master:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

5.1

Emptying the pan

Before emptying
. Turn off appliance and let it cool down.
. Remove containers from the tank.
Drain tap
Drain tap
Overflow pipe
Overflow pipe
holder
Drain tap
5.2

Raising the heating element

Drain
permanently
connected to
waste pipe
Drain for emptying into a
vessel in the base unit
Close
Open
. Only on appliances without waste connec­
tion: Put a temperature resistant container
with a sufficient capacity under the drain
outlet.
Removing the overflow pipe
CAUTION! The overflow pipe is hot.
There is a risk of scalding from any hot water
flowing out of the overflow pipe.
. Therefore remove the overflow pipe from the
drain slowly and carefully.
Opening the drain tap
CAUTION! There is a risk of scalding
from the hot water as the tank is drained!
. Open the drain tap. Turn the lever as far as
it goes.
D The water drains away.
CAUTION! heating element may still be
hot, risk of burns
Allow the heating elements to cool down.
Use pot holders or protective gloves.
. Swivel heater up in the direction of the ar­
row.
en
33 / 84

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Visionpro

Table des Matières