Télécharger Imprimer la page

VITO PRO-POWER VICOC200A Mode D'emploi page 38

Publicité

Les langues disponibles

Les langues disponibles

EN
1. Untighten both hexagonal screws and
remove the filter cover;
2. Remove the filter element and blow it
with compressed air (<3 bar pressure)
until it gets completely clean;
3. Place the filter and assemble the
remaining components in the reverse
order of disassembly;
Using the air filter doesn't
guarantee the quality of the air
produced by the compressor. This air
isn't suitable for human consumption.
5.5 - CLEANING AND STORAGE
Cleaning
After each use clean every components
of the compressor. Rub the machine
with a clean and damp cloth or blow
it with low pressure compressed air. A
careful handling protects the equipment
and extends its lifespan.
Keep the compressor and its ventilation
openings unobstructed. Clean them
regularly to avoid clogs.
Storage
To avoid unwanted starts, unplug the
power cord, empty the compressed air
tank and remove every compressed air
tools connected to the compressor.
When the compressor isn't being used,
it shall be kept inside a dry place,
corrosive steam free and away from
children's reach.
38
All manuals and user guides at all-guides.com
6. ENVIRONMENT
The packaging is made up of
recyclable materials, which you
can dispose on local recycling points.
Never place power tools in
the domestic waste!
According to the European Directive
2012/19
/CE
electronic equipment waste and its
transposition into national law, power
tools must be collected separately
and delivered to the collection sites
provided for this purpose.
Wastes such as used oil, lubricant,
filters
and
dangerous to humans, animals and the
environment. Therefore, they must be
properly eliminated or recycled.
Before replacing the oil, find a proper
recycling point to discard it. Do
not throw it in the domestic waste,
watercourses or in the ground.
You can obtain information regarding
the disposal of the compressor through
the person in charge for the recycling
in your city.
SAFETY
on
electrical
and
worn
parts
may
be
7. CUSTOMER SERVICE
Tel.: 256 331 080
E-mail: sat@centrallobao.pt
Site: www.centrallobao.pt

Publicité

loading