Garland 880 QG Manuel D'instructions page 36

English
6. START UP INSTRUCTIONS
6.1. UNPACKING AND LIST OF MATERIALS
Carefully inspect the product to ensure that there are
no damaged elements. If you fi nd any damaged or
missing parts, do not use the machine until the defect
has been repaired or all the missing pieces replaced.
Using the machine without all of its parts or with
defective parts can cause severe personal injury.
6.2. ASSEMBLY
6.2.1. MOUNTING OF THE WHEELS AND FRONT
PROTECTOR
Wheel
insert the wheels in the order shown in the diagram
and tighten the screw
Soporte delantero
36/184
Cap Wheel
Place the front protector as shown in the diagram and
tighten the two screws
6.2.2. MOUNTING THE CHUTE AND EXIT TUBE
Place the chute and exit tube
screw with washer
Fig.1