Craftmade CD52 Mode D'emploi page 7

13
Electrical Connections
Connect black and blue (if provided) fan wires to black outlet wire.
Connect white fan wire to white outlet wire and green grounding lead
wire from the grounding conductor to the supply circuit (see figure A).
Use wire connectors provided with your fan. No loose strands or loose
connections should be present. After wires have been connected, they
must be spread apart so the green and white are on one side of the outlet
box and the black and blue are on the other side. Turn splices upward
and carefully push all wiring into outlet box. For optional wall control
see figure B or Figure C for alternate wiring. When wall switches are
employed, switches should be UL listed for use with ceiling fan.
NOTE: Make sure fan on/off switch is always at "high speed" location if your fan is
controlled by additional wall switch.
White
Black
Blue
Black
Figure A
Ground
Green
White
Electrical Connections Continued...
Ground
White
Black
Black
Light Switch
Blue
Figure B
White
Black
Fan
Switch
Light
Switch
Figure C
Green
White
Ground
Black
Black
Green
Blue White