Publicité
Les langues disponibles
Les langues disponibles
11
5 Blade Installation
Remove rubber cushions, saving
motor screws for blade
installation. Using motor screws
(S5) provided, line up holes from the
blade arm with the holes in the motor
housing. Tighten screws securely.
12 12
Step 11
12
Operation Instructions
1. The sequence of operation for the motor pull/chain switch is
OFF-HI-MED-LOW.
2. Push the slide switch RIGHT for FORWARD, and LEFT for
REVERSE action of the blades. (This does not apply to
outdoor fans)
3. The pull chain switch for the lighting is two positions - ON/OFF.
Light Pull Chain
CAUTION
Even if your fan is mounted with the blades more than 7 feet from the floor, be
careful to avoid placing your raised arms or any object in the path of the blades.
Motor Pull Chain
Slide Switch
Publicité
