dji C8000 Guide D'utilisateur page 4

Les langues disponibles

11. DO NOT use the battery station during a thunderstorm.

12. Refer to the document of the batteries for more safety instructions before use.

13. DO NOT hold the charging cables to carry the battery station. Otherwise, the cables may be

damaged.

14. DO NOT use the battery station in an area where batteries are stored. There should be a

distance of at least 30 cm between the battery station and any charging batteries. Otherwise,

the battery station or charging batteries may be damaged by excessive heating and may

even lead to a fire hazard.

15. Keep the battery station away from inflammable materials while charging. DO NOT place the

battery station or charging batteries on a blanket or any carpeted surfaces when in use.

16. For activation or firmware updates, the battery station can be connected to the DJI ASSISTANT

(MG Series) / (Delivery Drones Series) or the remote controller. Make sure the remote controller

firmware and the DJI Assistant 2 software have been updated to the latest version before use.

Introduction

The C8000 Intelligent Battery Station can connect with up to two batteries. While charging, the

battery station monitors the status of the batteries and can automatically adjust the charging

current if required. The battery station continues to charge even if the ventilation holes are

blocked.

Users can check the battery charging status LEDs and the warning indicator on the operation

panel of the battery station to confirm if there are any errors. The battery station can be

connected to a remote controller using a USB-C cable and users can launch the app compatible

with the aircraft to check more detailed information regarding any errors. Additionally, the

battery station has the following functions: overcurrent protection, overcharging protection,

under-voltage protection, overheating protection, and status display.