Publicité
Les langues disponibles
Les langues disponibles
Turn the whole cooktop off by touching the ON/OFF
control.
Beware of hot surfaces
H will show which cooking zone is hot to touch.
It will disappear when the surface has cooled
down to a safe temperature. It can also be used
as an energy saving function if you want to heat
further pans, use the hotplate that is still hot.
3.3.3
Using the Boost function
Touching the heating zone slider control
Touching the slider to the right end . Make sure the
display shows "P".
Touching the heating zone slider control that you wish
to cancel the boost function.
Choose any power level of the touch control and the
Boost function will be deactivated.
•
The function can work in any cooking zone.
•
The cooking zone returns to its original setting after 5 minutes.
•
If the original power setting equals 0, it will decrease to 14 after 5 minutes.
3.3.4
Flexible Area
•
This area can be used as a single zone or as four independent zones, accordingly to the cooking needs
anytime.
•
Flexible area is made of 4 independent inductors that can be controlled separately two by two. When
working as a single zone, the part that is not covered by cookware is automatically switched off after one
minute.
•
To grant a correct heat distribution, the cookware should be correctly placed:
Activate the boost function
Cancel the Boost function
EN-14
Publicité
