Danby DCR016A3WDB Manuel Du Propriétaire page 6

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the screw securing the hinge cover and
remove the hinge cover. Remove the two screws
securing the upper hinge and remove the upper
hinge. Remove the hinge hole covers from the
top left side of the cabinet. Remove the door
from the cabinet. See fi gure A.
2. Remove the hinge hole cover from the top left
side of the door and place it in the hinge hole on
the top right side of the door. See fi gure B.
3. Remove the solid foot from the bottom left side of
the cabinet and remove the adjustable foot and
lower hinge from the bottom right side of the
cabinet. Install the lower hinge and adjustable
foot on the bottom left side of the cabinet and
install the solid foot on the bottom right side of
the cabinet. See fi gure C.
4. Place the door on the cabinet and install the
upper hinge on the top left side of the cabinet.
Before tightening the screws in the upper hinge,
ensure that the top of the door is level with the
top of the cabinet and that the rubber gasket is
making a good seal with the cabinet all the way
around. Install the hinge cover over the hinge
and install the hinge hole covers in the screw
holes on the top right side of the cabinet. See
fi gure D.
A
B
C
D
5