Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
Engage the first handle bar ("C" shape) on the cart platform. With a rubber mallet, firmly hit each upper ends of
1
the handle, as shown in the figure below (1), make sure that the handle is fully inserted by verifying that holes of
the handle bar are aligned with those on the cart platform. Do not screw anything at this stage.
Join the top of the second handle bar ("H" shape) with the first handle bar installed, as shown in the diagram
2
below (2), do not screw anything at this stage. Engage the "H" handle bar on the cart platform. With a rubber
mallet, firmly hit each side of the central tube, as shown in the diagram below (2), make sure that the handle is
fully inserted by verifying that holes of the handle bar are aligned with those on the cart platform.
Put together the tops of both handle bars using two 3/4 in. barrel nut and two 1 in. carriage bolt supplied. Make
3
sure that everything is firmly screwed.
Fasten the assembled handle bar to the cart platform using four 2 in. hex bolts and nuts supplied. Make sure that
4
everything is firmly screwed.
Lay down the cart on its side to install casters. Firmly screw the casters under the cart using sixteen 3/8 x 1 in.
5
hex bolts and washers supplied.
THE USE OF A RUBBER MALLET IS RECOMMENDED TO
AVOID DAMAGE TO THE COMPONENTS OF THE CART.
(NOT INCLUDED)
4x
2x
2x
BOX CONTENTS
QTY.
PART CODE
2
VB-NB1/4X3/4Z
3/4 in. barrel nut
2
VB-BC1/4X1Z
1 in. carriage bolts
VB-B3/8X2Z
2 in. hex bolts
4
16
VB-B3/8X1Z
1 in. hex bolts
4
VB-N3/8Z
3/8 in. hex nuts
16
VB-WL3/8Z
3/8 in. lock washers
321116900
Cart platform
1
1
321117300
"C" handle bar
1
321117200
"H" handle bar
4
I-DCC8R
Swivellings casters
I-DCCDL
Directional lock
1
Caster brake
1
I-DCCWL
16x
4x
16x
DESCRIPTION
1
3
2
5
3
ENGLISH
ENGLISH
4
Publicité
