Bear JSQ-F50D2 Manuel D'utilisation page 5

Method of use
(I) Adding water:
Method I: Take down the top cap assembly and inject water into the
water tank through a water-containing vessel.
Method II. Take down the top cap assembly, lift the water tank to the
water channel for direct water injection into the water tank through the
faucet.
Attention: Please add clean tap water or purified water of above 6℃ and
below 40℃. It is prohibited to add water into the mist vent.
For the first use, it is needed to remove the foam inside the base.
Foam
(It should be
taken out for
the first use)
(II) Add the fragrance:
Add essence into the fragrance box inside the base. This product does
not provide the essential oil which can be bought from the supermarket
or ordered online. It is suggested that the added essential oil should not
exceed one third of the content of the fragrance box each time. Please
select the plant essential oil during purchasing. Otherwise, the atomiza-
tion effect will be affected).
5
Method of use
Attention:
1.Before cleaning, it is necessary to pull the power plug.
2.While wiping the stain of the power line, a piece of dried soft cloth
should be used for wiping.
3.Regularly clean the incrustation and sundries of the water tank and
water channel. They are suggested to be cleaned once every 1 to 2
weeks.
4.To avoid bacteria breeding, it is needed to change the water frequently.
When the machine is not in use for a long time, it should be placed back
into the packaged box after it is cleaned up and dried in the air, being
kept in dried places.
Analysis of common problems
Note: In case of failed troubleshooting with the above phenomenon
analysis, please contact the maintenance point or the dealer of the
Company. It is strictly prohibited for non-professionals to dismantle this
machine without approval.
Abnormality Reason analysis
The humidifier is not The power plug is
working not inserted in place
Water in the water
tank runs out
The water inside the
water channel or the
The gas is smelly
water tank is dirty
6
Solution
Insert the power
plug in place
Add water to the
water tank
Clean the water
channel and water
tank and replace with
it clean water