Publicité
Les langues disponibles
Les langues disponibles
ENERGY SYNC
10 English
COMFORT COMES IN MANY COLORS
Energy Sync lets you see how much or how little energy your
heater is using to maintain your ideal room temp. Colors
blend from warm to cool hues in sync with your Vornado's
heat output.
1. Turn Energy Sync feature On/Off by pressing
while the heater is
in operation.
2. To adjust the
DARK ORANGE
brightness on the
front display, hold
ORANGE
HIGH HEAT
down
for three or
more seconds and
PINK
release when the
desired brightness
YELLOW
(750W Min)
is reached. Once
desired brightness
LOW HEAT
DARK PURPLE
level is reached, the
setting is saved until
PURPLE
changed by the user.
NO HEAT
BLUE
(Fan Only)
HOW TO USE
Before use, check appliance for visible damage. DO NOT USE THIS HEATER if there is evidence of damage. If any damage is found, contact
Vornado Air LLC at 1-800-234-0604.
1. Use integrated handle on top of heater for
lifting and carrying.
2. Position heater so airflow is not obstructed.
3. Unwrap power cord from storage tray on back
of heater. Plug power cord into standard
grounded wall outlet.
(1500W Max)
4.
Touch the Power button
and select Mode or
Fan Only
. Room temperature will illuminate
on both displays. Set thermostat to desired
temperature using -/+. SET TEMP numbers will
flash on both displays as you adjust. Once the
selection is made it will flash for five seconds,
become constant for five seconds and then
returns to room temperature. The displays will
then dim after 20 seconds. Default settings
upon first use will be High Heat and set
temperature of 75 degrees.
5. Set timer to automatically power the unit off by
pressing
. 0 will flash on both top and front
displays. Press
to select the amount of time in
one-hour intervals, up to 12 hours. User can also
use -/+ to select the amount of time.
After a selection is made or after five seconds
of inactivity, the number selection will stop
flashing and become constant. It is then
displayed for five seconds, before room
temperature is displayed again. To cancel the
timer operation, select 0 hours or hold
for
three seconds.
The white indicator light on front display and
TIMER on top display will illuminate to indicate
the timer is on.
COOL DOWN
When you power off your heater while in
High or Low heat mode, it automatically
enters a cool down routine in which the
heating element turns off and the fan
exhausts remaining heat. During Cool
Down, both top and front displays count
down before powering off completely.
English
11
Publicité
