Outputs - Ecler eSAM603 Notice D'utilisation


Line level signals: to manage the important level differences existing between conventional CD and
LINE sources and other devices capable of producing audio signals, the LINE inputs 2-5 of the
eSAM603 are standard line inputs (0dBV) and the sensitivity of the LINE input #6 can be selected
(0/-6dBV) by internal jumper (the default position is 0dBV). A sensitivity of -6dBV is ideal for low-
level sound sources such as media players, portable MP3 players, tablets, computers, mobile
phones, etc.
Turntables CAN NOT be directly connected to this unit, because eSAM603 has no RIAA preamp
equipped input.

5. OUTPUTS

The eSAM603 has three electronically balanced outputs with Euroblock connectors.
Connection is made according to the following diagram:
The master level of each mixer output (OUT A, B or C) must be adjusted so that the overload
indicators (CLIP) are not permanently lit on the system amplifiers, but at most on the lowest frequencies
marking the rhythm.
Other connections on the back panel:

AUX/REC output with a nominal output of 0dBV (10k load) and an extra gain setting of +6dB,
enabled by internal jumper (0dBV is the default position).

MUTE remote control input: enabled by external dry contact closure. It allows connection of fire
detection systems and other safety devices that have to mute the three mixer outputs by using this
control signal. The mode of operation is "NO" (normally open).
6