JUNO JDWK907S0 Mode D'emploi page 57

For more information how to
use the function refer to the
hob user manual.
Activating Maximum Motor
Speed
When you press the button
Maximum Motor Speed starts to operate
for 6 minutes. After that time, the
appliance returns to its previous speed
settings.
When the function is active, the
filter alarm indicator
turned on (white).
When the function is turned on,
additional touch on the button
does not have any effects.
Activating and deactivating the
filter notification
Filter alarm reminds to change or clean
the charcoal filter and clean the grease
CARE AND CLEANING
Cleaning the grease filter
Each filter must be cleaned at least once a
month. Filters are mounted with the use of
clips and pins on the opposite side.
To clean the filter:
1. Pull the cover to open it.
1
2. Press the handle of the mounting clip
on the filter panel underneath the hood
(1).
All manuals and user guides at all-guides.com
, the
is
filter. The filter indicator
(red) for 30 seconds if the grease filter
must be cleaned. The filter indicator
flashes (red) for 30 seconds if the
charcoal filter must be replaced or
cleaned.
Refer to filter alarm in care and
cleaning chapter.
1. Switch on the control panel.
2. Make sure that the icons are turned
off.
3. To activate or deactivate the charcoal
filter notification touch the button
3 seconds.
If the charcoal filter notification
is activated, the filter icon
flashes (white) for 5 seconds.
If the charcoal filter notification
is deactivated, the filter icon
remains fixed (white) for 5
seconds.
1
2
3. Slightly tilt the front of the filter
downwards (2), then pull.
Repeat the first two steps for all filters.
4. Clean the filters using a sponge with
non abrasive detergents or in a
dishwasher.
57
is turned on
for