Kuppersbusch EKI8340.2 Manuel D'instructions page 30

Booster function
The Power function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones work during 5 minutes with an ultra high power.
Power is foreseen for example to heat up rapidly big quantities of water, like nuddles

Start up / Stop the booster function:
Action
Zone selection
Start up the Power
Stop the Power

Power management:
When it comes to the power, the cooking zones are running by pairs and cannot exceed an
overall maximum of power. If the selected heating levels for both zones exceed the maximum
available amount of power, the powermanagement function is automatically reducing the power
from one of these zones. The display of this zone is first blinling ; the level is then automatically
reduced to the highest suitable position.
Heating zone selected
[ P ] is displayed
Timer
The timer is able to be used simultaneous with all heating zones and this with different time
settings (from 1 to 99 minutes) for each heating zone.

Setting and modification of the cooking time :
Action
Zone selection
Select the power level
Select « Timer »
Set the « Timer »
The time is confirmed and the cooking starts.

To stop the cooking time:
Action
Zone selection
Select the timer
Stop the timer

Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished, the timer displays blinking [ 00 ] , a sound rings and
the heating zone stops.
To stop the sound and the blinking it is enough to press the timer key [
Control panel
Press on the "SLIDER"
across from the desired zone
Slide on the "SLIDER"
Slide on the "SLIDER"
The other heating zone: (example: power level 9)
[ 9 ] goes to [ 8 ] and blinks
Control panel
Press on the "SLIDER"
across from the desired zone
Slide on the "SLIDER"
Press on the [
Press on the [
Slide on the "SLIDER"
Control panel
Press on the "SLIDER"
across from the desired zone
Press on the [
Press on the [
30
]
] to increase of ten
]
]
].
Display
[ 0 ]
[ 0 ] to [ P ]
[ P ] to [ 0 ]
Display
[ 0 ]
[ 1 ] to [ 9 ]
[ 00 ]
[ 10, 20, 30...]
[ 31, 32, 33...]
Display
time remaining
time remaining
[ 00 ]