Brandson Equipment 305893 Mode D'emploi page 28

5.3 Assembling and locking the rear protective cage
Align the motor unit (6) with the rear protective cage (3). Mount it and secure it
using the plastic nut (1).
6
Align the cage with the appropri-
ate hole.
5.4 Assembling and locking the rotor blade
Align the rotor blade with the motor unit (6), insert it completely, and then attach
the rotor blade using the mounting screw (2).
6
Align the rotor blade with the
guide on the motor unit.
28
3
Tighten the plastic nut clockwise.
4
Lock the screw (2) in coun-
ter­clockwise direction.
1
2
English