Publicité
Les langues disponibles
Les langues disponibles
11
Step 11
Blade Installation
Using motor screws (S5) provided, install blade assemblies on fly wheel
located on bottom of motor housing by aligning the holes as shown in
the diagram below. Make sure blade arm gaskets (S7) are between fly
wheel and blade arm. Attach all six (6) blade assemblies.
Blade Arm
Blade Arm Gasket (S7)
Motor Screws (S5)
12
Step 12
Attach mounting bracket for glass (3) to
base of motor with screws provided. Screws
are in parts bag with bracket.
All manuals and user guides at all-guides.com
Mounting
Bracket for
Glass (3)
13
Attach two of the fixture plate screws (S10) to fan motor housing base (7)
allowing room for fixture plate to be attached. Before attaching fixture plate,
attach black wire from fixture plate to black wire on motor housing by
connecting plugs together. Next attach white wire from fixture plate to white
wire on motor housing. Attach fixture plate (8) to base of motor housing by
rotating fixture plate into keyhole slots being careful not to pinch wires.
Attach remaining two screws in holes as shown in diagram. Secure all screws
firmly.
Step 13
Fan Motor
Housing (7)
Fixture Plate
Screws (S10)
Fixture Plate (8)
Publicité
