Publicité
Les langues disponibles
Les langues disponibles
8
1. Connect fan wires to ceiling wires: white fan wire to white outlet wire,
black to black and green to green. Wire connectors (S6) are provided for
your convenience. If an additional blue wire is present then also connect the
blue wire to the black wire. (Optional light kit may be wired to individual
wall switches, if desired.)
2. After connections
Ground
are made, turn
splices upward
White (Neutral)
and push carefully
into outlet box.
Black (Power)
Separate blue and
black wires on one
side of the box, and
white and green wires
on the other side.
White
Black
There are 4 colored
wires coming from the
Blue
top of the motor
(including ground wire).
Wire Connnections
Outlet Box
Fan wires
Black
Black
(Hot wire for fan)
Green
Green
(Ground wire)
White
White
(Neutral wire)
Black
Blue
(Light kit wire)
All manuals and user guides at all-guides.com
Step 8
Wire
Connectors
(S6)
Ground
(Green)
Outlet Box
Ground (Green)
Downrod Ground
(Green)
Mounting Bracket
Ground (Green)
9
Step 9
Attach canopy (#3) to the
mounting bracket by placing
screws (S2) into slot in canopy.
Twist clockwise to lock
into place. Tighten screws firmly.
10
For blade assembly, position blade arm (#10), gasket (11), blade (#5) and
blade ornaments (#12) so that all screw holes are aligned (as shown in
figure below). Using blade screws (S4), insert through top of blade holder,
through blade, and into blade ornament. Tighten securely.
Blade Arm (10)
Blade Holder
Screws (S6)
CAUTION:
Install blade holders to motor only after motor installation is complete. This will
prevent damage to the blade holders which have been carefully balanced.
IMPORTANT: Remove rubber cushions, saving motor screws for installation.
Ceiling
Canopy (3)
Screws (S2)
Bottom of Canopy
Step 10
Blade Screws (S4)
Blade (5)
Gasket (11)
Blade Ornament (12)
Publicité
