Publicité
All manuals and user guides at all-guides.com
lock the rear part and turn it back in a counter clock-
wise direction.
Battery Level Indicator
The charging indicator LEDs (9) are located on one side
of the housing.
The 3 LEDs indicate the battery level of the built-in
battery:
1 LED (red): = 30% +/-5% capacity
2 LEDs (red + yellow): = 60% +/-5% capacity
3 LEDs: (red + yellow + green) = 90% +/-5% capacity
For checking the battery level status, press the button
(8). If only the red LED turns on, charge the built-in
battery of the screwdriver.
Battery Disposal
1. Run the motor until the battery is completely dis-
charged.
2. Open the housing of the screwdriver by loosening all
screws. Remove the battery from the screwdriver.
3. Wrap tape around the battery terminals or enclose in
a sealable plastic bag to prevent possible shorting.
4. Dispose of batteries through your local waste
removal authority.
Cleaning and Storing
The screwdriver does not require maintenance and
does not contain parts serviceable by you. In case of
Using
17
Publicité
