Publicité
Hint: If the LED does not light up the battery is dam-
aged.
Inserting the Tool Bits
Tool bits can either be directly inserted into the hexago-
nal chuck (1) of the screwdriver or into a bit holder.
Turning ON and OFF
Press the ON/OFF trigger (4) to turn on the screw-
1.
driver.
Release the trigger in order to stop the screwdriver.
2.
Rotating Direction
Press the rotating direction button to set clockwise or
3.
counter clockwise running of the motor.
The rotating direction button can only be pressed,
4.
while the ON/OFF trigger is released.
In the middle position the ON/OFF trigger is locked.
Changing the Handle Position
The screwdriver is delivered in the pistol grip configura-
tion.
1. To transform it to a straight configuration, depress
the locking button PRESS (7) and turn the rear part
of the housing clockwise by 180°.
2. The locking button snaps automatically and locks the
housing into place. To change back to the pistol grip
configuration, depress the locking button (7) to un-
All manuals and user guides at all-guides.com
Using
16
Publicité
