Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• HOLIDAY MODE
Press "M" and scroll with the
"HOLIDAY" mode starts flashing.
"Enter"
Then press the
AUTO
P
DAY
In Holiday mode, the unit operates at the minimum
ventilation flow rate.
Once the HOLIDAY function is enabled, the command
asks to specify the duration of the period in number
of days.
If the duration is undefined, it is possible to set no
value. In this case, the undefined holiday mode is
activated after a few minutes.
In any case it is possible to manually interrupt the
Holiday mode by selecting a different mode in the
User Menu.
PLEASE NOTE: the operating speed of the HOLIDAY
mode can be changed by the installer (Parameters
Menu section).
TOUCH PAD
until the
key to confirm.
+
-
°C
ACTIVATION OF
WEEKLY PROGRAM
Press "M"
; scroll with the
P
the function "
" starts flashing and confirm by
pressing "Enter"
When confirmed, the preset program is activated.
The display shows the chosen program number
when the unit is "put into service".
AUTO
P
DAY
P
If this icon is present, it means that
a scheduled program is active.
The number identifies the pro-
gram chosen when
commissioning the unit.
The activation of the weekly program does not
preclude the user's ability to manually change the
speed of the fans.
In fact, despite having an active program in time
slots, the user can still use the TOUCH PAD, increa-
sing or decreasing the speed as desired.
The manual override applied to the weekly program
will remain operational until the next time slot,
when automatic programming will become active
again.
TOUCH PAD
.
°C
English
until
107
Publicité
Table des Matières
