Kohler K-1110 Guide D'installation page 19

Terminate the Cable at the Blower - Remote (cont.)
• Connect the blue pigtail lead to the L2 conductor of the power cable.
• Connect the green with yellow stripe pigtail lead to the grounding or earthing conductor of the
power cable.
With the two screws, reinstall the access cover on the blower motor.
Tighten the strain relief on the power cable at the blower motor.
Remove any dust or debris from the blower motor area.
Kohler Co.
All manuals and user guides at all-guides.com
19 1035472-2-G