Lavor GNX 32 Mode D'emploi page 6

EN
DESCRIPTION AND ASSEMBLY
INSTRUCTIONS
A Motor head
B Main switch
D Liquid filter (liquid suction)
E(*) Filter (dry suction) - optional
G Head on tank locks
H Suction inlet
I Tank
L Flexible hose
GENERAL INFORMATIONS
• This appliance is suitable for commercial use, for
example in hotels, schools, hospitals, factories,
shops, offi ces and rental bussinesses.• The
appliance is intended for use as a wet and dry
vacuum cleaner.
• The appliance is intended for use as a wet and dry
vacuum cleaner.
• The use of the appliance in conjunction with
particularly fine dust (size less than 0.3 μm)
requires the use of specific filters provided as
optional (Hepa - cod. 5.212.0037).
• Failure to comply with the abovementioned
conditions will lead to cancellation of the
guarantee.
GENERAL WARNING
Components used in packaging (if plastic
•
bags) can be dangerous keep away from children
and animals.
The use of this machine for anything not
•
specified in this manual may be dangerous and
must be avoided.
Only use the socket outlet on the appliance
•
for purposes specified in the instruction manual.
(note: this is only for appliance provided with the
All manuals and user guides at all-guides.com
M Tube
N Accessory holder
P Double function brush
Q Handle with air control valve
R Straight lance
S Liquids-riser
T PVC round brush
U Small inlet
socket outlet pag.3).
Before emptying the tank, switch off the
•
machine and disconnect the plug from the power
outlet.
Always check the appliance before use.
•
The suction nozzle should be kept away
•
from the body, especially delicate areas such as
the eyes, ears and mouth.
The appliance is not to be used by children
•
or persons with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction.
Children being supervised not to play with
•
the appliance.
The equipment should be correctly
•
assembled before use.
Ensure that power sockets used ore correct
•
for the machine
Never grasp the mains plug with wet
•
hands.
Check the voltage indicated on the
•
rating plate is the same as the supply
voltage.
6