Publicité
Les langues disponibles
Les langues disponibles
8. Canopy Assembly.
Temporarily raise canopy to hanging bracket
to determine which 2 screws in hanging
bracket align with slotted holes in canopy,
and then lower canopy and partially loosen
these 2 screws. Remove the other 2
screws/lock washers and set aside.
Now, lift canopy to hanging bracket again,
aligning slotted holes in the canopy with
loosened screws in hanging bracket. Twist
canopy to lock. Re-insert the other 2
screws/washers and secure all screws with a
Phillips screwdriver.
9. Shade Installation.
Locate slots on glass shade and align with
nodules on underside of motor housing.
push up on shade and turn
(clockwise)
until it slides completely into place.
Pull down gently on shade to make sure glass
shade is secured completely.
Gently
to the RIGHT
page 9
slotted
hole
hanging bracket
canopy
slots
shade
Publicité
