Publicité
Les langues disponibles
Les langues disponibles
ON/OFF Button (A)
Press this button when unit is in stand-by mode to turn it on.
At the first time, the unit will start to work at speed 2 and its indicator light
will turn on in the control panel.
Press this button when the unit is on to turn it off.
NOTE: the fan will run according to the settings it was last used
before it was turned off when device switched on next time.
NOTE: pressing this button in heating mode, the unit will work for
approx 10 seconds in fan mode in order to cool down the heating
element.
SPEED (B) Button (in fan mode)
Press this button when the unit is on to select the desired speed: 1, 2, 3,
4, 5. Cyclic function.
The relative indicator light will turn on in the control panel according to
the speed selected.
HORIZONTAL OSCILLATION Button (C)
Press this button when the unit is on to activate automatic horizontal
oscillation. The related indicator light will turn on in the control panel.
VERTICAL OSCILLATION Button (D)
Press this button when the unit is on to activate automatic vertical
oscillation. The related indicator light will turn on in the control panel.
NOTE: vertical and horizontal oscillation can be activated at the same
time.
NOTE: under normal shutdown conditions, the vertical swing motor
returns to the lowest point of the swing before shutting down.
TIMER / TEMPERATURE Button (E) (control panel)
FAN MODE: press this button one time to set the timer. The related
indicator light ("h") will turn on in the control panel.
Press the button e1-e2 (in the control panel or remote control) to set
timer to switch the fan off automatically after the set time from 1 hour to
12 hours (1 hour step).
Display will show the time in hours before the automatic shutdown.
To deactivate timer function repeatedly press e2 button till the display will
show "0" and wait the device exit timer setting.
HEATING MODE (NON ECO mode): press this button one time to set the
desired temperature (default 35°C). Display will show the temperature in
°C blinking. Press e1-e2 button (in the control panel or remote control) to
set the desired temperature (form 15°C to 35°C, 1°C step).
27
Publicité
