Maytag MDC4809AWW Instructions D'utilisation page 7

Split & Fit™ Utensil Basket
The split silverware basket can be
separated and placed in various
locations in the lower rack. Load
flatware and utensils into both
sections or just one, depending on
your load.
To split the basket:
Hold the basket firmly along the sides.
Unlock the baskets.
Silverware basket lids:
Use silverware basket lids to provide
optimal spacing and best cleaning
performance.
Cup Clips
The Cup Clips located in the center of the upper
rack can be used to hold lightweight plastic items,
cooking utensils and knives in place. Clip the item
between the tine and the clip.
Stack-Rack
Fold down the extra shelf on
the right-hand side of the
upper rack to hold additional
cups, stemware or long items
such as utensils and spatulas.
SilverWare Blast™
The SilverWare Blast
is designed to focus
cleaning power on
your silverware.
All manuals and user guides at all-guides.com
Dishwasher Features
Your Maytag dishwasher may have some or all of these features.
Removable Upper Rack
The removable rack allows you to wash larger items such as stock
pots, roasters, and cookie sheets in the lower level rack.
IMPORTANT: Remove dishes prior to removing the upper rack
from the dishwasher.
To remove the rack (push tab rack stop):
1. Roll the rack ¹⁄₃ to ¹⁄₂ of the way out.
2. Remove each plastic push tab rack stop
from the end of each track by pushing
inward toward the rack on the ridged area
of the rack stop. The rack stop will snap
open and can be easily removed by
pulling straight out. Be sure to support the
track while removing rack stops.
3. Roll the rack all the way out of the track and remove from the
dishwasher.
To replace the rack:
Reverse the above steps 1-3 to replace the rack into the
dishwasher.
Portable Dishwashers (on some models)
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Connecting the Faucet Adapter
NOTE: A special adapter must be installed on the faucet before the
dishwasher can be connected. Complete Installation Instructions
and the adapter are packed with your dishwasher. (See the
Installation Instructions.)
When moving your dishwasher, make sure the door is latched. Hold
the dishwasher at the top front corners.
Preparing the faucet
1. Remove the screen holder or aerator, screen, and washer from
the end of the faucet.
2. Use the faucet adapter kit that came with your portable
dishwasher to modify the faucet where the dishwasher will be
used.
7