Eneo VKC-1381/IR-3.6 Mode D'emploi page 3

Installation and Operating Instructions
1/3" Day/Night Camera with LED Illumination
VKC-1381/IR-3.6
1. Safety Instructions
• Read these safety instructions and the operation manual first before you
install and commission the camera.
• Keep the manual in a safe place for later reference.
• P rotect your camera from contamination with water and humidity to prevent
it from permanent damage.
Never switch the camera on when it gets wet. Have it checked at an autho-
rized service center in this case.
• Never operate the camera outside of the specifications as this may prevent
the camera functioning.
• Do not operate the cameras beyond their specified temperature, humidity or
power ratings.
Operate the camera only at a temperature range of -10°C to +50°C and at
a humidity of max. 80%.
• To disconnect the power cord of the unit, pull it out by the plug.
Never pull the cord itself.
• P ay attention when laying the connection cable and observe that the cable
is not subject to heavy loads, kinks, or damage and no moisture can get in.
• The warranty becomes void if repairs are undertaken by unauthorized
persons. Do not open the camera housing.
• Never point the camera towards the sun with the aperture open.
This can destroy the sensor.
• Installation, maintenance and repair have to be carried out only by authorized
service centers.
Before opening the cover disconnect the unit from mains input.
• The fitter is responsible for the system of protection being followed in
accordance with the technical data, e.g. by sealing of the cable outlet with
silicone.
• Contact your local dealer in case of malfunction.
• Only use original parts and original accessories from Videor E. Hartig GmbH.
• Do not use strong or abrasive detergents when cleaning the dome.
Use a dry cloth to clean the dome surface.
In case the dirt is hard to remove, use a mild detergent and wipe gently.
• During assembly, care must be taken to ensure that existing seals are
correctly inserted and are not displaced as a result of assembly.
You must not continue to use damaged seals.
NOTE: This is a class A digital device. This digital device can cause
harmful interference in a residential area; in this case the user
may be required to take appropriate corrective action at his/her
own expense.
All manuals and user guides at all-guides.com
2. General Description
• Weatherproof day&night CCD camera
• 1/3" Super HAD II CCD
• Removable IR cut filter (ICR)
• Sensitivity of 0.33Lux at F1.2 (colour)
• B&W display at night time and IR LED illumination
• 30m night observation distance (30 pcs. IR LED's)
• Automatic shutter control (ESC)
• Automatic white balance (AWB)
• Supply Voltage: 12VDC
• Aluminium housing with sunshield
• Protection Rating: IP67
• Mounting stand with cable concealed thru bracket
3. Installation
NOTE: When you install the camera, please glue up the end of cable to
keep it stable in order to protect the camera from the humidity
problems.
Assemble a fixing screw.
Cable concealed through bracket
When using the cable conceales
bracket, it is not able to install on
the ceiling.