Hamilton Beach 62650 Mode D'emploi page 5

All manuals and user guides at all-guides.com
840163800 ENv03.qxd 4/10/07
To Insert Attachments
Flat Beaters, Straight Wire
Beaters and Whisk
1. Make sure mixer is unplugged and
speed control is set to OFF.
2. Insert a beater or attachment into an
Using Your Mixer
Make sure mixer is unplugged and
1.
speed control is set to 0 (OFF).
Insert beaters.
Plug mixer into electrical outlet.
2.
Place beaters into bowl.
Move the speed control to desired
3.
speed, starting at 1 and increasing to
a higher speed as necessary.
2:51 PM Page 5
Twisted Wire Beaters and Dough
Hooks
1. Insert the wire beater or the dough
Collar
opening on the
bottom of the
mixer. Push
until it clicks
into place.
Repeat with
other beater or
2. Align tabs on the beater or dough
attachment.
Tab
When finished mixing, move the
4.
speed control to 0 (OFF) and
unplug mixer.
5. To eject beaters, push straight down
hook with the
collar into the
opening indi-
cated by the
illustration on
the mixer.
hook with the
Slot
slots in the
opening. Push
until it clicks
into place.
Repeat with
other beater or
dough hook.
on the eject
button.
5